Asphalt melting system

Solid asphalt conveying equipment

Asphalt pumps, valves and pipes

Asphalt storage tanks

Design pressure: shell (shell) atmospheric pressure MPa tube (jacket) 0.8 MPa Design temperature: shell (shell) 200 ℃ pipe (jacket) 260 ℃ Working medium: shell (shell) asphalt pipe (jacket) thermal oil Maximum working pressure: shell (shell) atmospheric MPa pipe (jacket) 0.7 MPa Structure: single layer □ multi-layer (□ heat jacket □ tape winding □ wrapping) Heat transfer area: 50 m2 Volume 150 m2 Weight ～18000kg Specifications: Inner diameter φ5000 Wall thickness 8 mm □ Total length Total height 9760 mm

Asphalt electric melter

The equipment takes 6kw electric heating pipe as the heat source and heat conduction oil as the heat transfer medium to heat and melt the solid asphalt until it warms up to the required temperature.

Asphalt storage tank group

Solid asphalt melter is a heat exchange equipment, solid asphalt material through the melter to accept external heat, and then warming melting, according to the material characteristics are divided into granular asphalt melter and lump asphalt melter; according to the heating medium is divided into direct-heat type melter (coal-fired, oil and gas) and thermal oil melter (including electric heating melter); according to the structure of the melter is divided into vertical melter and horizontal melter; according to the form of the heating pipe is divided into tube bundle type and coil type.

Asphalt storage tank group

Specification Model: DN100, Body Material: Q235B, Working Medium: asphalt/heat-conducting oil Main structure: vertical, support type: skirt, pressure test: 0.6Mpa

Asphalt buffer tank

Asphalt buffer tank parameters: Nominal volume: 30m3 Feed: liquid asphalt Liquid asphalt temperature: 160 ~ 230 ℃ Density of melted asphalt: about 1200～1300 kg/m3 Tank diameter: φ3300mm Allowable working pressure of heat pipe: 0.8MPa Allowable working temperature: 300℃ Vessel category: atmospheric pressure vessel Heating area: 60m2